dmesg - Intel Core i5 580M
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-27-generic (buildd@roseapple) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #40-Ubuntu SMP Tue Jul 9 00:17:05 UTC 2013 (Ubuntu 3.8.0-27.40-generic 3.8.13.4)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009b5fefff] usable
BIOS-e820: [mem 0x000000009b5ff000-0x000000009b67efff] reserved
BIOS-e820: [mem 0x000000009b67f000-0x000000009b77efff] ACPI NVS
BIOS-e820: [mem 0x000000009b77f000-0x000000009b7fefff] ACPI data
BIOS-e820: [mem 0x000000009b7ff000-0x000000009b7fffff] usable
BIOS-e820: [mem 0x000000009b800000-0x000000009fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000157ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Hewlett-Packard HP ENVY 14 Notebook PC /1436, BIOS F.26 12/01/2011
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x158000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-EFFFF write-through
F0000-FFFFF write-combining
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 0FFE00000 mask FFFE00000 write-protect
2 base 080000000 mask FE0000000 write-back
3 base 09C000000 mask FFC000000 uncachable
4 base 09B800000 mask FFF800000 uncachable
5 base 100000000 mask F80000000 write-back
6 base 158000000 mask FF8000000 uncachable
7 base 160000000 mask FE0000000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x9b800 max_arch_pfn = 0x400000000
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x9b7fffff]
[mem 0x00000000-0x9b7fffff] page 2M
kernel direct mapping tables up to 0x9b7fffff @ [mem 0x1fffc000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x157ffffff]
[mem 0x100000000-0x157ffffff] page 2M
kernel direct mapping tables up to 0x157ffffff @ [mem 0x9b5fc000-0x9b5fefff]
RAMDISK: [mem 0x342ee000-0x3616efff]
ACPI: RSDP 00000000000fe020 00024 (v02 HP )
ACPI: XSDT 000000009b7fe120 0009C (v01 HPQOEM SLIC-MPC 00000001 01000013)
ACPI: FACP 000000009b7fc000 000F4 (v04 HP SLIC-MPC 00000001 MSFT 01000013)
ACPI: DSDT 000000009b7e9000 0F70E (v02 HP SLIC-MPC 00000001 MSFT 01000013)
ACPI: FACS 000000009b71e000 00040
ACPI: ASF! 000000009b7fd000 000A5 (v32 HP SLIC-MPC 00000001 MSFT 01000013)
ACPI: HPET 000000009b7fb000 00038 (v01 HP SLIC-MPC 00000001 MSFT 01000013)
ACPI: APIC 000000009b7fa000 0008C (v02 HP SLIC-MPC 00000001 MSFT 01000013)
ACPI: MCFG 000000009b7f9000 0003C (v01 HP SLIC-MPC 00000001 MSFT 01000013)
ACPI: SLIC 000000009b7e8000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SSDT 000000009b7e6000 01152 (v01 TrmRef PtidDevc 00001000 INTL 20051117)
ACPI: SSDT 000000009b7e5000 00172 (v01 VaRef Va_Acpi 00003000 INTL 20051117)
ACPI: BOOT 000000009b7e4000 00028 (v01 HP SLIC-MPC 00000001 MSFT 01000013)
ACPI: SSDT 000000009b7e3000 00C39 (v01 INTEL SataPri 00001000 INTL 20051117)
ACPI: SSDT 000000009b7e2000 006C5 (v01 INTEL SataSec 00001000 INTL 20051117)
ACPI: ASPT 000000009b7e1000 00034 (v04 HP SLIC-MPC 00000001 MSFT 01000013)
ACPI: DMAR 000000009b7e0000 000B8 (v01 INTEL CP_DALE 00000001 INTL 00000001)
ACPI: SSDT 000000009b7df000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: SSDT 000000009b7dd000 01A94 (v01 AmdRef AmdTabl 00001000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000157ffffff]
Initmem setup node 0 [mem 0x00000000-0x157ffffff]
NODE_DATA [mem 0x157ffb000-0x157ffffff]
[ffffea0000000000-ffffea00055fffff] PMD -> [ffff880153800000-ffff8801575fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x157ffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0x9b5fefff]
node 0: [mem 0x9b7ff000-0x9b7fffff]
node 0: [mem 0x100000000-0x157ffffff]
On node 0 totalpages: 996749
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3911 pages, LIFO batch:0
DMA32 zone: 9880 pages used for memmap
DMA32 zone: 622440 pages, LIFO batch:31
Normal zone: 5632 pages used for memmap
Normal zone: 354816 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000009b5ff000 - 000000009b67f000
PM: Registered nosave memory: 000000009b67f000 - 000000009b77f000
PM: Registered nosave memory: 000000009b77f000 - 000000009b7ff000
PM: Registered nosave memory: 000000009b800000 - 00000000a0000000
PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
e820: [mem 0xa0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880157c00000 s85056 r8192 d21440 u262144
pcpu-alloc: s85056 r8192 d21440 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 981167
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3809496k/5636096k available (7012k kernel code, 1649100k absent, 177500k reserved, 6230k data, 996k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
NR_IRQS:16640 nr_irqs:744 16
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16252928 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2660.097 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.19 BogoMIPS (lpj=10640388)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26709 entries in 105 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
dmar: DRHD base: 0x000000fed91000 flags: 0x0
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c0000020230272 ecap 1000
dmar: DRHD base: 0x000000fed93000 flags: 0x1
dmar: IOMMU 2: reg_base_addr fed93000 ver 1:0 cap c9008020630272 ecap 1000
dmar: RMRR base: 0x00000099bdf000 end: 0x00000099bfffff
dmar: RMRR base: 0x0000009de00000 end: 0x0000009fffffff
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 580 @ 2.67GHz (fam: 06, model: 25, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
smpboot: Total of 4 processors activated (21280.77 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x9b67f000-0x9b77efff] (1048576 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 000000009b651598 00502 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00502 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 000000009b64f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 000000009b650a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 000000009b64ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: Power Resource [FN00] (on)
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
_OSC request data:1 8 0
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x4050-0x4057]
pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xc4506100-0xc450610f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xc4505c00-0xc4505fff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xc4500000-0xc4503fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xc4505800-0xc4505bff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0x4048-0x404f]
pci 0000:00:1f.2: reg 14: [io 0x405c-0x405f]
pci 0000:00:1f.2: reg 18: [io 0x4040-0x4047]
pci 0000:00:1f.2: reg 1c: [io 0x4058-0x405b]
pci 0000:00:1f.2: reg 20: [io 0x4020-0x403f]
pci 0000:00:1f.2: reg 24: [mem 0xc4505000-0xc45057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xc4506000-0xc45060ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f]
pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
pci 0000:00:1f.6: reg 10: [mem 0xc4504000-0xc4504fff 64bit]
pci 0000:01:00.0: [1002:68c1] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xc4400000-0xc441ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa60] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xc4420000-0xc4423fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff]
pci 0000:02:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref]
pci 0000:02:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
pci 0000:03:00.0: [8086:4239] type 00 class 0x028000
pci 0000:03:00.0: reg 10: [mem 0xc2400000-0xc2401fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
_OSC request data:1 1f 0
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
pci0000:ff: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:ff: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0x9b5ff000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9b800000-0x9bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.1 BAR 13 [io 0x1000-0x1fff]
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x0800-0x080f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x047f] has been reserved
system 00:04: [io 0x0500-0x0501] has been reserved
system 00:04: [io 0x0700-0x077f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs SYN1e2a SYN1e00 SYN0002 PNP0f13 (active)
pnp 00:08: Plug and Play ACPI device, IDs HPQ0004 (active)
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: [mem 0xc4600000-0xc4600fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xc4440000-0xc445ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xc0420000-0xc043ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xc4400000-0xc44fffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc43fffff]
pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0xc2400000-0xc33fffff]
pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 31236k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x975fc000-0x9b5fc000] (64MB) mapped at [ffff8800975fc000-ffff88009b5fbfff]
Simple Boot Flag at 0x44 set to 0x1
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1375411217.560:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 7501
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (on)
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (68 C)
[Firmware Bug]: No valid trip found
GHES: HEST is not enabled!
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xc4505c00
ACPI: Battery Slot [BAT0] (battery present)
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-27-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 20, io mem 0xc4505800
ACPI: EC: GPE storm detected(9 GPEs), transactions will use polling mode
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-27-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: b19078b01b96b975438ce0719f8a7eb15318eb67'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:05: setting system clock to 2013-08-02 02:40:18 UTC (1375411218)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
ACPI: Battery Slot [BAT1] (battery present)
Freeing unused kernel memory: 996k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1168k freed
Freeing unused kernel memory: 1080k freed
udevd[112]: starting version 175
[drm] Initialized drm 1.1.0 20060810
usb 1-1: new high-speed USB device number 2 using ehci-pci
Disabling lock debugging due to kernel taint
i915 0000:00:02.0: setting latency timer to 64
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
radeon 0000:01:00.0: enabling device (0000 -> 0003)
r8169 0000:02:00.0: irq 41 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0xffffc900107a8000, 64:31:50:7e:11:59, XID 083000c0 IRQ 41
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
i915 0000:00:02.0: irq 42 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
wmi: Mapper loaded
tsc: Refined TSC clocksource calibration: 2659.999 MHz
Switching to clocksource tsc
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
[drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
fbcon: inteldrmfb (fb0) is primary device
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.2: new low-speed USB device number 3 using ehci-pci
usb 1-1.2: New USB device found, idVendor=046d, idProduct=c051
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: USB-PS/2 Optical Mouse
usb 1-1.2: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
hid-generic 0003:046D:C051.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0
usb 1-1.3: new full-speed USB device number 4 using ehci-pci
usb 1-1.3: New USB device found, idVendor=03f0, idProduct=231d
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: HP Integrated Module
usb 1-1.3: Manufacturer: Broadcom Corp
usb 2-1.6: new full-speed USB device number 3 using ehci-pci
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.6: device descriptor read/64, error -32
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:01: registered as cooling_device5
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
acpi device:0a: registered as cooling_device6
ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:08/LNXVIDEO:01/input/input6
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[drm] initializing kernel modesetting (REDWOOD 0x1002:0x68C1 0x103C:0x1436).
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x13 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
[drm] register mmio base: 0xC4400000
[drm] register mmio size: 131072
vga_switcheroo: enabled
ATPX version 1
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
usb 2-1.6: new full-speed USB device number 4 using ehci-pci
usb 2-1.6: device descriptor read/64, error -32
ata1: SATA max UDMA/133 abar m2048@0xc4505000 port 0xc4505100 irq 43
ata2: SATA max UDMA/133 abar m2048@0xc4505000 port 0xc4505180 irq 43
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xc4505000 port 0xc4505300 irq 43
usb 2-1.6: device descriptor read/64, error -32
ATOM BIOS: MADISON
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
mtrr: no more MTRRs available
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 1922000 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] probing gen 2 caps for device 8086:45 = 1/0
[drm] Loading REDWOOD Microcode
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880148da4c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880148da4c0c
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 44 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] LVDS-2
[drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm] DP-1
[drm] HPD2
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
usb 2-1.6: new full-speed USB device number 5 using ehci-pci
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-9: M4-CT128M4SSD2, 070H, max UDMA/100
ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA M4-CT128M4SSD2 070H PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: ATAPI: hp DVDRAM GS30N, VC03, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM hp DVDRAM GS30N VC03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
[drm] fb mappable at 0xA0142000
[drm] vram apper at 0xA0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
[drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 1
xor: automatically using best checksumming function:
generic_sse: 12231.000 MB/sec
device-mapper: dm-raid45: initialized v0.2594b
Btrfs loaded
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1.6: device not accepting address 5, error -32
Adding 3985404k swap on /dev/sda5. Priority:-1 extents:1 across:3985404k SS
usb 2-1.6: new full-speed USB device number 6 using ehci-pci
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[530]: starting version 175
lp: driver loaded but no devices found
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
hp_accel: laptop model unknown, using default axes configuration
lis3lv02d: 8 bits sensor found
init: avahi-cups-reload main process (633) terminated with status 1
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ppdev: user-space parallel port driver
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 45 for MSI/MSI-X
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \_SB_.PCI0.IEIT.SGPE 2 (20121018/utaddress-251)
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \_SB_.PCI0.LPCB.PMBS 3 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000740-0x000000000000074f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
ACPI Warning: 0x0000000000000740-0x000000000000074f SystemIO conflicts with Region \_SB_.PCI0.P0P2.PEGP.GPIO 2 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000730-0x000000000000073f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
ACPI Warning: 0x0000000000000730-0x000000000000073f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPIO 2 (20121018/utaddress-251)
ACPI Warning: 0x0000000000000730-0x000000000000073f SystemIO conflicts with Region \_SB_.PCI0.P0P2.PEGP.GPIO 3 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000700-0x000000000000072f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
ACPI Warning: 0x0000000000000700-0x000000000000072f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPIO 2 (20121018/utaddress-251)
ACPI Warning: 0x0000000000000700-0x000000000000072f SystemIO conflicts with Region \_SB_.PCI0.P0P2.PEGP.GPIO 3 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
cfg80211: Calling CRDA to update world regulatory domain
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2012 Intel Corporation
iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X
intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
usb 2-1.6: device not accepting address 6, error -32
hub 2-1:1.0: unable to enumerate USB device on port 6
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
init: failsafe main process (860) killed by TERM signal
device-mapper: multipath: version 1.5.1 loaded
microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
usbcore: registered new interface driver btusb
microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532
microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
microcode: Microcode Update Driver: v2.00 , Peter Oruba
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
kvm: disabled by bios
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
input: HP WMI hotkeys as /devices/virtual/input/input11
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400, board id: 3655, fw id: 631163
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0xd2 offMax=0x1686
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.10_Ubuntu (interface 0x001a0004).
vboxpci: IOMMU not found (not registered)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: plymouth-stop pre-start process (1578) terminated with status 1
wlan0: authenticate with 00:24:a5:d7:92:77
wlan0: send auth to 00:24:a5:d7:92:77 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:24:a5:d7:92:77 (try 1/3)
wlan0: RX AssocResp from 00:24:a5:d7:92:77 (capab=0x411 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
usb 1-1.2: USB disconnect, device number 3
usb 2-1.6: new full-speed USB device number 7 using ehci-pci
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.6: new full-speed USB device number 8 using ehci-pci
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.6: new full-speed USB device number 9 using ehci-pci
usb 2-1.6: device not accepting address 9, error -32
usb 2-1.6: new full-speed USB device number 10 using ehci-pci
usb 2-1.6: device not accepting address 10, error -32
hub 2-1:1.0: unable to enumerate USB device on port 6
usb 2-1.6: new full-speed USB device number 11 using ehci-pci
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.6: new full-speed USB device number 12 using ehci-pci
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.6: new full-speed USB device number 13 using ehci-pci
usb 2-1.6: device not accepting address 13, error -32
usb 2-1.6: new full-speed USB device number 14 using ehci-pci
usb 2-1.6: device not accepting address 14, error -32
hub 2-1:1.0: unable to enumerate USB device on port 6
usb 2-1.6: new full-speed USB device number 15 using ehci-pci
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.6: new full-speed USB device number 16 using ehci-pci
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.6: new full-speed USB device number 17 using ehci-pci
usb 2-1.6: device not accepting address 17, error -32
usb 2-1.6: new full-speed USB device number 18 using ehci-pci
usb 2-1.6: device not accepting address 18, error -32
hub 2-1:1.0: unable to enumerate USB device on port 6
usb 2-1.6: new full-speed USB device number 19 using ehci-pci
usb 2-1.6: device descriptor read/64, error -32
hub 2-1:1.0: unable to enumerate USB device on port 6
usb 2-1.6: new full-speed USB device number 20 using ehci-pci
hub 2-1:1.0: unable to enumerate USB device on port 6
usb 2-1.6: new full-speed USB device number 21 using ehci-pci
hub 2-1:1.0: unable to enumerate USB device on port 6
usb 2-1.6: new full-speed USB device number 22 using ehci-pci
hub 2-1:1.0: unable to enumerate USB device on port 6
usb 2-1.6: new full-speed USB device number 23 using ehci-pci
hub 2-1:1.0: unable to enumerate USB device on port 6
usb 2-1.6: new full-speed USB device number 24 using ehci-pci
hub 2-1:1.0: unable to enumerate USB device on port 6
usb 2-1.6: new full-speed USB device number 25 using ehci-pci
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.6: new full-speed USB device number 26 using ehci-pci
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.6: new full-speed USB device number 27 using ehci-pci
usb 2-1.6: device not accepting address 27, error -32
usb 2-1.6: new full-speed USB device number 28 using ehci-pci
usb 2-1.6: device not accepting address 28, error -32
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: connect-debounce failed, port 6 disabled
usb 2-1.6: new full-speed USB device number 29 using ehci-pci
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.6: new full-speed USB device number 30 using ehci-pci
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.6: device descriptor read/64, error -32
usb 2-1.6: new full-speed USB device number 31 using ehci-pci
usb 2-1.6: device not accepting address 31, error -32
usb 2-1.6: new full-speed USB device number 32 using ehci-pci
usb 2-1.6: device not accepting address 32, error -32
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: connect-debounce failed, port 6 disabled
hub 2-1:1.0: connect-debounce failed, port 6 disabled
hub 2-1:1.0: connect-debounce failed, port 6 disabled
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6
hub 2-1:1.0: unable to enumerate USB device on port 6